System; System Setting - Intelicis Cedar 880AG User Manual

4 System

This chapter contains information on the following topics:
• Change system setting
• Change password and privilege password
• Upgrade
• Execute CLI command file
4.1

System Setting

Select System >Setting to change system parameters.
System Name
The System Name is a descriptive string (maximum length of 20) that describes the
system. The default value is <none>.
Login Name
The administrator uses the combination of Login Name and Login Password to log
in to Cedar. After log in, the administrator can view most of the system parameters.
In order to view all of the system parameters and perform any changes, the
administrator needs to enter the privilege mode.
The Login Name may have a maximum length of 31. The default value is "admin".
Session Timeout
Cedar 880AG Enterprise Dual-Radio AP/Bridge
22