Table of Contents
Advertisement
6.3.2 MAC Authentication
1
Identify a RADIUS server to be used for MAC authentication. Write down its IP
address and server secret code. Confirm the authentication port is 1812.
2
Create some MAC user entries in the RADIUS server. For example,
User Name: 000cf157b3bc
Password: <none>
Type: MAC
3
Click Security->RADIUS from the Cedar web interface to display all the RADIUS
profiles.
4
Click Add to add a new profile. Enter the following sample data and use default for
the rest of the parameters.
Profile Name: myRADIUS
Primary Auth Server IP Address: 192.168.1.1
Primary Auth Server Secret: xxxx
5
Click Apply.
6
Click Security->MAC Authentication from the Cedar web interface to display all the
MAC authentication profiles.
7
Click Add to add a new profile. Enter the following sample data and use default for
the rest of the parameters.
Profile Name: myMAC
Authentication Method: Consult RADIUS Server if not found on the permitted or
rejected MAC lists.
8
Click Apply.
9
Save the configuration.
Cedar 880AG Enterprise Dual-Radio AP/Bridge
44
Advertisement
Table of Contents
