Change Password - Intelicis Cedar 880AG User Manual

The Cedar Command Line Interface times out after the session is inactive for a
period of time. This parameter specifies the time out period in minutes. The default
is 10 minutes.
SNTP Setting
This Simple Network Time Protocol (SNTP) setting is used to synchronize
computer clocks on the Internet. If the setting is on (default), Cedar automatically
synchronizes its clock with the reference SNTP Server.
SNTP Server
Specify the IP address or the host name of the reference SNTP Server. The default
value is "time.nist.gov".
SNTP Offset
The SNTP Server uses the UTC (Universal Time, Coordinated) as the reference for
the current time. The SNTP offset specifies the number of hours to be added to or
subtracted from the UTC time for conversion to local time. Here are some
examples:
• San Francisco, California, USA: UTC - 8
• Toronto, Ontario, Canada: UTC - 5
• Stockholm, Sweden: UTC + 1
• Beijing, China: UTC + 8
• Tokyo, Japan: UTC + 9
Changes to System Name and/or Login Name are saved automatically. You do not
need to save the changes by clicking Save in the tool bar.
4.2

Change Password

Select System > Change Password to change the login password and/or privilege
password. It is highly recommended that the administrator change the default values after
initial installation.
Cedar 880AG Enterprise Dual-Radio AP/Bridge
23