Menu; Tool Bar - Intelicis Cedar 880AG User Manual

3.3.1 Menu

The menu displayed on the left side of the screen allows the administrator to perform the
following configurations:
• System: Configure system parameters such as system name, password and upgrade
• Network: Configure network parameters such as IP address, default route and VLAN
• Security: Configure security parameters such as RADIUS and authentication profiles
• Wireless: Configure wireless parameters such as SSID, radios
• Management: Configure Telnet, SSH and SNMP parameters
• Log: Display system log file
• Monitor: Display statistics and usage of the system

3.3.2 Tool Bar

The tool bar located in the upper right-hand corner provides a shortcut to frequently used
operations. Here is a summary of each of their functions.
Enable
Cedar 880 has two operating modes: normal and privilege. The normal mode allows
the administrator to view most, but not all of the system parameters. The privilege
mode allows the administrator to view all of the system parameters as well as
modify them.
Cedar 880AG Enterprise Dual-Radio AP/Bridge
19