Lan Settings; Wireless Security - D-Link DAP-1360 User Manual

Section 3 - Configuration
Bridge with AP wireless mode connects 2 LANs, while still functioning as a wireless AP for local wireless clients.
The Wireless Network Name is a unique name that
Wireless
Network Name
identifies a network. All devices on a network must
(also called the
share the same wireless network name in order
SSID):
to communicate on the network. If you decide to
change the wireless network name from the default
setting, enter your new wireless network name in
this field.
This button is unavailable in Bridge with AP mode.
Site Survey:
Input a new number if you want to change the default
Wireless
setting. All devices on the network must be set to the
Channel:
same channel to communicate on the network.
Enable Auto
This option is unavailable in Bridge mode.
Channel scan:
Enable Hidden
Check the box if you do not want the SSID to be
broadcast by the DAP-1160. This prevents the SSID
Wireless:
from being seen by Site Survey utilities, so any
wireless clients will have to be pre-configured with
the SSID of the DAP-1160 in order to connect to it.
Wireless
Select a wireless security setting. Options are None,
Security Mode:
WEP, WPA, WPA2, or WPA2-Auto. See p.34 of this
manual for a detailed explanation of the wireless
security options.
Remote AP Mac :
Enter the MAC addresses of the APs in your network that will serve as bridges to wirelessly connect multiple networks.
Select None to disable encryption to across the network. Select WEP 64bits or WEP 128bits to limit communication to
Bridge Security:
only those devices that share the same WEP settings. Select WPA-PSK or WPA2-PSK to secure your network using a
password and dynamic key changes (No RADIUS server required).
Note: Bridge with AP mode is not completely specified in WiFi or IEEE standards. It can work with other DAP-1160 units. Communication with other APs (even
other D-Link APs) is not guaranteed.
D-Link DAP-1360 User Manual
Bridge with AP
44