Color Doppler - GE VOLUSON 730 Instruction Manual

Technical Data / Information
7.13

Color Doppler

C-Mode:
Color flow imaging is possible with Curved Array, Linear Array and Phased Array probes.
Display Modes:
Color coding steps:
Depth range:
Zero line shift:
Inversion of color direction:
Wall Motion Filter:
Smoothing Filter:
Gain control :
Density (color line density):
Ensemble (color shots per line): 7 to 31
Pulse repetition frequency:
CFM Map:
Frequency range:
Balance:
Max. meas. velocity:
Min. meas. velocity:
Display Modes:
Scale:
Automatic moving tissue suppression: yes
7-10
2D/CFM (Single, Dual, Quad); 2D+2D/C
Simultaneous triplex mode 2D/CFM/D
8192 color steps
axial: 0 to B-scan range
lateral: 0 to B-scan-range
17 steps (independent from spectral Doppler)
yes
7 steps
12 steps rising time
12 steps falling time
30dB
10 steps
100 Hz to 20.5 kHz
8 different color codes for each probe
1 to 15 MHz depending on the probe,
adjustable in 3 steps (low, mid, high)
from 25 to 225 in 41 steps
5.5 m/sec.
0.3 cm/sec.
V-T (velocity + turbulence)
V (velocity)
V-P (velocity + power)
T (turbulence)
P-T (power + turbulence)
kHz, cm/s, m/s
®
Voluson 730 - Instruction Manual
105838 Rev. 3