Hazards - Contec CMS50EW User Manual

1.3. 1.3.

Hazards

Hazards
1.3. 1.3. Hazards Hazards
␇
Keep the oximeter away from dust, vibration, corrosive substances, explosive materials, high
temperature and moisture.
␇
If the oximeter gets wet, please stop using it immediately.
␇
When it is carried from cold environment to warm or humid environment, please do not use it
immediately
␇
DO NOT operate keys on front panel with sharp materials.
␇
High temperature or high pressure steam disinfection of the oximeter is not permitted. Refer to
User Manual in the relative chapter (7.1)for instructions of cleaning and disinfection.
␇
Do not have the oximeter immerged in liquid. When it needs cleaning, please wipe its surface
with medical alcohol by soft material. Do not spray any liquid on the device directly.
When cleaning the device with water, the temperature should be lower than 60℃.
␇
␇
The fingers which are too thin or too cold may affect the measure accuracy , please clip the
thicker finger such as thumb or middle finger deeply enough into the probe.
␇
The pulse oximeter can be used to adult or infant. Whether the device is used to adult or
infant,it depends on the probe selected ( optional ).
␇
The update period of data is less than 5 seconds, which is changeable according to different
individual pulse rate.
␇
Please read the measured value when the waveform on screen is equably and steady-going,
This measured value is optimal value. And the waveform at the moment is the standard one.
␇
If some abnormal conditions appear on the screen during test process, pull out the finger and
reinsert to restore normal use.
␇
The device has normal life for three years since the first electrified use.
␇
This device has the function of alarming, users can check on this function according to chapter
6.1 as a reference.
␇
The device has the function of limits alarming, when the measured data is beyond the highest
or lowest limit, the device would start alarming automatically on the premise of the alarming
function is on.
␇
The device has the function of alarming, this function can either be paused, or closed (default
setting) for good.This function could be turned on through menu operation if you need.please check
the chapter 6.1 as a reference.
␇
The device may not work for all patients. If you are unable to achieve stable readings,
discontinue use.
␇
Do not contort or drag the connection of the device.
2