Table of Contents
Advertisement
RESET STATION PASSCODES
TO DEFAULT
Individual keyset users can set or change their own individual passcodes.
These passcodes are used to lock and unlock keysets, override toll restric-
tion and access the DISA feature. At times, it may be necessary for the sys-
tem administrator to reset a station's passcode to default "1234." This pro-
gram cannot be used to display passcodes, only to reset them.
PROGRAM KEYS
UP & DOWN - Select the extension number.
Hold - Press to reset the passcode.
Open customer programming and follow the instructions below.
ACTION
1. Press Transfer and then dial 101
Display shows
2. Dial the station number OR use the
UP and DOWN keys to scroll through
the keyset numbers and press the
right soft key to move the cursor right
3. Press Hold to reset the passcode
4. Press the right soft key to return to
step 2 OR press Transfer to store and exit
programming OR press Speaker to
store and advance to the next program
DEFAULT DATA: ALL STATION PASSCODES = 1234
DISPLAY
[201]
PASSCODE
PASSCODE:
[205] PASSCODE
PASSCODE:
[205] PASSCODE
PASSCODE : 1234
12
PROGRAM STATION NAMES
This program is used to assign a character name or identification for each
extension. You may assign a name of 11 characters long.
PROGRAM KEYS
UP & DOWN - Used to scroll and move cursor.
KEYPAD - Used to enter characters.
Hold - Press to clear entry.
Open customer programming and follow the instructions below.
ACTION
1. Press Transfer and then dial 104
Display shows
2. Dial station number (e.g., 205)
OR press UP or DOWN to select the
station and press the right soft key to
move the cursor
3. Enter the station name using the
procedure described on the next page
and press the right soft key to return to
step 2
4. Press Transfer to store and exit
programming OR press Speaker to store
and advance to the next program
NOTE: Directory information is always 11 characters.
DEFAULT DATA: NONE
13
DISPLAY
[201] STN NAME
[205] STN NAME
[205] STN NAME
SAM SMITH
Advertisement
Table of Contents
