Cisco C1000-8T-2G-L Installation Manual page 41

Switch Installation
2
Step 4
Slide the retainer through the other latches to lock it.
Figure 23: Locking the Retainer
1
2
Step 5
(Optional) Use the small sleeve for thin power cords. Use the small sleeve to provide greater stability for thin
cords. Detach the sleeve, and slide it over the power cord.
Figure 24: Sleeve Around the Power Cord
1
Step 6 Secure the AC power cord by pressing on the retainer.
Smaller sleeve for thin
power cords
AC power cord
Smaller sleeve for thin
power cords
Smaller sleeve for thin
power cords
Cisco Catalyst 1000 Series 8-Port and 16-Port Switch Hardware Installation Guide
Installing the Power Cord Retainer (Optional)
3 Latches
2 AC power cord
31