Mounting The Switch On A Din Rail - Cisco C1000-8T-2G-L Installation Manual

Switch Installation
Figure 18: Securing the DIN-Mount Tray to the Switch
1

Mounting the Switch on a DIN Rail

Caution Do not install the switch with its front panel facing up. Following safety regulations, install the switch with
its front panel facing down, to allow sufficient airflow and to provide easier access to the cables.
Warning
To prevent airflow restriction, allow clearance around the ventilation openings to be at least: 3 in. (7.6 cm)
Statement 1076
Procedure
Step 1
Position the switch directly in front of the DIN rail, making sure that the top of the DIN rail mount clip hooks
over the top of the DIN rail.
Switch
Cisco Catalyst 1000 Series 8-Port and 16-Port Switch Hardware Installation Guide
Mounting the Switch on a DIN Rail
2 Number-10 Phillips
pan-head screws
27