Fujitsu Lifebook MH380 User Manual page 56

Hot-swapping Batteries
To hot-swap batteries in your battery compartment follow these easy steps:
B
E SURE TO PLUG IN AN
BATTERY PRESENT TO SUPPORT THE SYSTEM WHILE THE BATTERY IS BEING REPLACED
AC A
USE AN
1
Close any open files and put your system into Standby mode.
2
Connect an AC adapter or Auto/Airline power adapter to provide power to the system.
3
Close the display and turn the system over.
4
Holding the system upside down with the battery towards the back, slide the left battery release latch (labeled
"1 HOLD") to the left and hold it.
5
Slide the right battery latch (labeled "2") to the right.
6
While continuing to hold the left battery latch, slide the battery out of the battery compartment and remove it.
7
Slide the new battery into the compartment; the left battery release latch will click into place. Slide the right
battery latch to the left to lock it.
8
Press the Suspend/Resume button to return your system to normal operation
I L
F THE ITHIUM ION BATTERY CONNECTOR IS NOT FULLY SEATED
NOTEBOOK OR CHARGE YOUR BATTERY
AC A
DAPTER PRIOR TO REMOVING THE BATTERY
DAPTER YOU WILL LOSE ANY UNSAVED FILES
.
55 - Lithium ion Battery
. T
HERE IS NO BRIDGE
.
.
,
YOU MAY NOT BE ABLE TO USE YOUR
. I
F YOU DO NOT