Fujitsu Lifebook MH380 User Manual page 55

Cold-swapping Batteries
1
Have a charged battery ready to install.
2
Shut down your system and disconnect the AC adapter.
3
Close the display and turn the system over.
4
Holding the system upside down with the battery towards the back, slide the left battery release latch (labeled
"1 HOLD") to the left and hold it.
5
Slide the right battery latch (labeled "2") to the right.
6
While continuing to hold the left battery latch, slide the battery out of the battery compartment and remove it.
7
Slide the new battery into the compartment; the left battery release latch will click into place. Slide the right
battery latch to the left to lock it.
8
Plug in the AC adapter and turn the power on.
Figure 17. Removing a Battery
54 - Lithium ion Battery