Broadcastvision Entertainment AudioFetch Express User Manual page 19

– to indicate this selection is ready to be executed.
4. Or, instead of releasing the button, continue pressing the button and
eventually (about 4 seconds later) the yellow LED will start flashing by
itself, it indicates the window is "open" for selecting a factory restore for
only the Wi-Fi module.
o Select this option by releasing the button during the time when only
the yellow LED is flashing. This does not execute the restore, it merely "selects"
it. The selection is indicated by yellow LED turning on solid, and the red LED turns
on also – to indicate this selection is ready to be executed.
5. Or, continue pressing the button and eventually (about 4 seconds later) the green LED will
start flashing by itself, it indicates the window is "open" for selecting a factory restore for
only the AFE (all items in the AudioFetch Doghouse).
o Select this option by releasing the button during the time when only
the green LED is flashing. This does not execute the restore, it
merely "selects" it. The selection is indicated by yellow LED turning
on solid, and the red LED turns on also – to indicate this selection
is ready to be executed.
6. Continuing to press the button down will cause the LEDs to cycle back
through #3-5, in an endless loop (until button is released).
7. Once the button is released the corresponding selection is display with
constant-on LEDs:
o red, green, yellow all on means the selection is: restore both AFE
and Wi-Fi defaults
o red, yellow on means the selection is: restore only Wi-Fi defaults
o red, green on means the selection is: restore only AFE defaults
8. The selection indication will remain on for approximately 5 seconds. If the
button is pressed again during this 5 second window, the selected restore
will be executed. If the button is not pressed, after 5 seconds the AFE will
return to normal operation (LEDs will go back to normal operating mode).
9. After the restore is executed, both Wi-Fi module and AFE will be restarted.
Total process takes about 35 seconds.
Note: There is a "Restore Factory Defaults" link/button in the Doghouse, this
will restore AFE defaults only, and will not affect the Wi-Fi module.
19