Broadcastvision Entertainment AudioFetch Express User Manual page 14

4. If Peak Audio Status is too low or too high, enter a new value for Audio Gain.
Values entered can be numbers like 7 or 9.0 or 12.5 (the tenths digit can only
be "0" or "5"). Acceptable range is -100.0 to 20.0. Press the Enter key or
click the "Save" button to save the new gain value.
a. After saving, you should notice a corresponding change in the Peak
Audio Status level immediately
b. Keep adjusting the Audio Gain until Peak Audio Status is within
optimum range.
System Status
The System Status page shows basic information about the system and connected
users (see example on next page). Not all information is refreshed automatically,
click the "Refresh" button at the bottom of the page to update the display of latest
status.
Click the "Reset Statistics" button to reset the general statistics in the upper area.
14