Restoring Factory Defaults - Broadcastvision Entertainment AudioFetch Express User Manual

The CONTACT & LINKS page contains contact information in case support is
required, as well as a link to the online portal.
6.

Restoring Factory Defaults

Procedure:
1. Power up the AFE and allow it to fully boot (about 35 seconds)
2. Press and hold the
LEDs begin flashing
o It will take about 5 seconds of continuous press before the LEDs
begin flashing
o If the button is released during the 5 second period when all three
status LEDs are off, AFE operation will resume normally with no
restore of defaults.
3. When both green and yellow status LEDs are flashing together, it indicates
the window is "open" for selecting a factory restore for both AFE and
Wi-Fi Module.
o Select this option by releasing the button during the time both
green and yellow LEDs are flashing together. This does not execute
the restore, it merely "selects" it. The selection is indicated by both
green & yellow LEDs turning on solid, and the red LED turns on also
red User Button until both green and yellow status
 All three status LEDs will turn off during this 5 seconds
18