Loading Batteries Into The Remote Control; Effective Range Of Remote Control Unit - JVC DLA-NP5 Instructions Manual

Loading Batteries into the Remote Control

Loading the batteries
Removing the batteries

Effective Range of Remote Control Unit

When aiming the remote control toward the sensor on this
unit (front or rear), ensure that the distance to the sensor
is within 7 m (23 ft).
If the remote control fails to work properly, move closer
to this unit.
This unit
30°
30°
20°
20°
Remote Control
If the remote control has to be brought closer to the unit
0
to operate, it means that the batteries are wearing out.
Replace the batteries with new ones (AAA).
Insert the batteries according to the t s marks.
0
Be sure to insert the s end first.
When removing the battery, do so from the t end.
If an error occurs while using the remote control,
0
remove the batteries and wait for five minutes. Load
the batteries again and operate the remote control.
CAUTION
Do not put the remote control in a place with an
0
exposure to direct sun light or high temperature. It may
deformed due to heat, or the internal components may
be adversely affected resulting in fire hazard.
Remove the batteries from the remote control when
0
storing the remote control. Storing the remote control
for a prolonged period without removing the batteries
can cause battery leakage.
Risk of explosion if battery is replaced by an incorrect
0
type. Dispose of used batteries according to the
instructions.
If you want to dispose of the battery, please consider
0
the collection systems or facilities for appropriate
recycling.
Control through reflection off a screen, etc.
Ensure that the total of distance A (between this unit and
the screen) and distance B (between the remote control
and the screen) is within 7 m (23 ft).
* As the efficiency of signals reflected from the remote
control unit varies with the type of screen used, the
operable distance may decrease.
Screen
20° 20° 20°
20° 20° 20°
B
Remote Control
30°
30°
This unit
A
25