Resetting The Lamp Time 4 8 - JVC DLA-NP5 Instructions Manual

Resetting the Lamp Time 4 8

Reset the lamp time when you have replaced the lamp. It provides an estimated timing for lamp replacement
Resetting the lamp time from the menu screen
Press the [MENU] button to display the menu
1
Select "Function"""Lamp Reset" from the menu
2
On the "Reset Lamp Time?" screen, select "Yes" and press the [OK] button
3
The lamp time is reset to zero.
0
MEMO
Reset the lamp time only when you have replaced the lamp.
0
If the lamp time is reset while a lamp is in use, you may lose track of the timing for replacing the lamp. Doing so may
result in using the lamp beyond the estimated limit, thereby causing lamp blowout.
Trigger Off
Off Timer Off
ECO Mode Off
Network
Remote Code A
High Altitude Mode Off
Lamp Reset
Factory Reset
Software Update
Reset Lamp Time?
Yes No
93