Hdmi Edid Setting; Mode; Dsc; Hdr10 - JVC DLA-NP5 Instructions Manual

HDMI EDID Setting

Mode

For changing the EDID mode of the "HDMI 1/HDMI 2" terminal. Set to "A" under normal condition. The images may not
be displayed on some old devices. In this case, try "B" or "C".
Setting
A
B
C
* EDID (Extended Display Identification Data) refers to the information, such as supported resolutions, exchanged
between devices.

DSC

For configuring whether DSC transmission is allowed. Set to "On" under normal condition.
Setting
On
Off
* DSC (Display Stream Compression) is one of the lossy video signal compression transmission technologies.

HDR10+

For configuring whether HDR10+ transmission is allowed. To enjoy HDR10+ content, configure to "On".
Setting
On
Off
MEMO
The "HDMI EDID Setting" settings are saved separately for each input terminal. The name of the currently selected
0
input terminal is shown at the top right corner of the "HDMI EDID Setting" menu.
To switch to configure the settings for a different input terminal, press the "INPUT" button on the remote control unit,
0
or press the ↑↓ key on the projector unit after turning off the menu screen.
76
Configures the EDID mode to "A"
Supports up to 8K60p x y z 5 6 7 and 4K120p.
Configures the EDID mode to "B"
Supports up to 4K60p.
Configures the EDID mode to "C"
Supports up to 1080p60.
Allows compressed video transmission
Prohibits compressed video transmission
Allows HDR10+ transmission
Prohibits HDR10+ transmission
Description
Description
Description