JVC DLA-NP5 Instructions Manual page 51

Performing Tone Mapping Manually
"HDR(PQ)" gamma is the PQ curve adopted by HDR10. Fine adjustments can be made according to the screen size
and environment although the default settings for viewing with the projector have been adjusted to allow optimum
viewing.
Default settings when viewing HDR content of this projector
Picture Mode
Tone Mapping
Estimated Screen Size
Estimated MaxCLL/
MaxFALL
Picture tone adjustment method
Picture Tone
When Picture Tone is set to "-"
(The entire screen becomes dark.)
Screen size is smaller than estimated
0
MaxFALL/MaxCLL value is higher than
0
estimated (P. 90)
Screen becomes brighter in the course of
0
viewing
Bright/dark area adjustment method
Dark Level
(―) To enhance the contrast
Bright Level
(―) To enhance the gradation of highlight areas
: HDR10
: HDR(PQ)
: 90 to 120 inch (screen gain 1.0)
: MaxCLL 1000 nits, MaxFALL 400 nits
0
When Picture Tone is set to "+"
(The entire screen becomes brighter.)
Screen size is bigger than estimated
0
MaxFALL/MaxCLL value is lower than
0
estimated (P. 90)
Screen becomes darker in the course of
0
viewing
0
(+) To make the dark area information more
visible
0
(+) To enhance the contrast
51