Color Management - Panasonic PT-AE3000U Operating Instructions Manual

MPEG NR
You can adjust the automatic noise reduction
system level for MPEG format images. The system
minimise block noise and mosquito noise to
eliminate jagged edges, providing an overall
smoother image. Press I H to change the level.
Setting range: 0 to +3
NOTE:
• MPEG NR system is not available with COMPUTER/
HDMI (VGA60) signals.
FRAME CREATION
You can activate the rendering system for fast
motion frames with fewer afterimage. Press I H
to select the required option.
OFF Deactivate
MODE1 Setting for a standard image
MODE2 Setting for a moving image
NOTE:
• With some of the images, it might be difficult to see a
difference in result.
• The image might look slower with the MODE2 setting.
When the result does not meet your requirement, select
MODE1 or deactivate the system.

COLOR MANAGEMENT

You can manage your own defined color settings.
See "Setting your own color profile" on page 26.
x.v.Color
You can switch on/off the automatic adjustment
system for signals which comply with International
Standard xvYCC.
ON: Active
OFF: Deactive
NOTE:
• x.v.Color adjustment system is available only with
HDMI signals in COLOR1 of PICTURE MODE menu.
DETAIL CLARITY
You can switch the automatic detail clarity system
on/off.
ON: Active
OFF: Deactive
CINEMA REALITY
You can switch the automatic image synchroniser
on/off for 24 frames a second images, such as
movies. Press I H to select the required setting.
ON: Active
OFF: Deactive
NOTE:
• CINEMA REALITY is effective only with interlace
signals.
TV-SYSTEM
When the video signal is changed, the setting
switches automatically.
You can switch the setting manually to match the
video data. Press I H to cycle through the
options.
AUTO
SECAM
PAL-N
PAL-M
NOTE:
• AUTO setting will select from NTSC/NTSC 4.43/PAL/
PAL60/PAL-M/PAL-N/SECAM.
PICTURE menu
NTSC
NTSC 4.43
PAL
E
NGLISH - 35