Using The Cinema Color Management Function - Panasonic PT-AE900U Operating Instructions Manual

Using the Cinema Color
Management function(C.C.M)
You can adjust, save, and retrieve the settings for the selected colors of the
projected image based on the selected picture mode to suit your preference.
Press the F or G button to select an item, press
the I or H button to change the settings, and
press the ENTER button for confirmation.
Press the C.C.M button.
B The "COLOR MANAGEMENT" menu will be
displayed.
PROFILE
B Retrieves the saved profile (color settings which have been adjusted).
NORMAL When projecting images according to the setting of "PICTURE
MODE" (page 33). This setting is the factory default setting.
USER1/2/3 These items are displayed only when "PROFILE SAVE" has
been carried out. Refer to page 39 for details.
NOTE:
B Refer to page 65 for the general arrangement of the "COLOR
MANAGEMENT" menu.
B You can enter the "COLOR MANAGEMENT" menu from the
"ADVANCED MENU" in the "PICTURE" menu (page 46).
B When the "PICTURE MODE" menu is selected, the settings will switch
automatically to the last "PROFILE" settings that were used for the
selected picture mode.
B When retrieving a profile, "CURSOR" and "PROFILE SAVE" will not be
displayed if the picture mode being selected does not match the picture
mode which had been selected when that profile was saved. (You can
only check the color setting in the "LOG" menu.)
B "LOG" and "PROFILE SAVE" are displayed only when the colors have
been adjusted in "CURSOR" menu.
36-E
NGLISH
CURSOR
You can select a color in the projected image, and adjust the color settings.
Press the ENTER button to display the cursor ( B ).
# Select the color you want to adjust with the cursor.
B Press the F, G, I and H buttons to move the cursor, and then press
the ENTER button.
B The selected color ( C ) and the "CURSOR" menu ( A ) will be displayed.
$ Adjust the items in the "CURSOR" menu.
B The color adjusted in the "CURSOR" menu ( D ) will be displayed.
COLOR Adjusts the deepness of the color.
TINT Adjusts the hue of the color.
BRIGHT Adjusts the brightness of the color.
% Press the ENTER button to apply the adjusted color.
B The letters PROCESSING and the progress status bar will be displayed
while the adjusted color is applied.
B The adjusted color settings will be saved in the "LOG" menu.
If you would like to continue to adjust another color after adjusting a color,
press the MENU button or the RETURN button on the remote control unit,
and then repeat the steps from step #.
A
B
˛
C
& Press the MENU button or the RETURN button on the remote control
unit twice, and then save the adjusted color settings.
B Select the "PROFILE SAVE" menu from the "COLOR MANAGEMENT"
menu. The adjusted color settings will not be saved until you carry out
"PROFILE SAVE".
NOTE:
B The projected image will be paused when the cursor is displayed.
Press the MENU button or the RETURN button on the remote control
unit to cancel the still image. (If the "CURSOR" menu is displayed,
press the MENU button or the RETURN button twice.)
B When there are same or similar colors in the projected image, these
colors will also be changed.
˛
D
Screen
E -37
NGLISH