Communication Settings; Control Commands - Panasonic PT-AE3000U Operating Instructions Manual

Technical Information

Communication settings

Signal level
Sync. method
Baud rate
Parity

Control commands

Command Control contents
PON
POF
IIS
OMN
OEN
OBK
OCU/OCD/
Navigation buttons
OCL/OCR
OLE
OST
OFZ
FC1
FUNCTION BUTTON
OOT
OSH
OVM
OWM
VS1
VPM
PICTURE MODE
E
52 - NGLISH
RS-232C
Asynchronous
9 600 bps
None
In standby mode, all commands other than the PON command are ignored.
POWER ON
The PON command is ignored during lamp ON control.
If a PON command is received while the cooling fan is operating after the lamp has switched
POWER OFF
off, the lamp is not turned back on again straight away in order to protect the lamp.
Parameter:
CP1 = COMPONENT1 IN
INPUT SVD = S-VIDEO IN
HD1 = HDMI1 IN
HD3 = HDMI3 IN
MAIN Displaying the main menu.
ENTER Activating the selected items in the menu mode.
RETURN Returning to the previous menu or escaping from the menu mode.
OCU = F button
OCD = G button
LENS Activating the LENS CONTROL menu.
DEFAULT Resetting to the factory default setting. (page 28)
Freezing the projected screen.
FREEZE Parameter:
0 = OFF
Activates the function that is assigned to the FUNCTION button of the remote control.
Setting the duration of time to turn off the power automatically. (See "SLEEP" on page 44.)
SLEEP 0 = OFF
5 = 180min.
Turning off the projection temporarily.
BLANK Send the command to switch between ON and OFF.
Do not send the command consecutively.
PICTURE Activating the PICTURE menu. Send the command to switch menu items. (page 23)
Activating the WAVEFORM.
Parameter:
0 = OFF
WAVEFORM 1 = FULL SCAN (Y)
2 = FULL SCAN (R)
3 = FULL SCAN (G)
4 = FULL SCAN (B)
ASPECT Switching the aspect ratio. (page 24)
Switching the PICTURE MODE. (page 23)
Parameter:
NOR = NORMAL DYN = DYNAMIC CL1 = COLOR1
CN1 = CINEMA1
Character length
Stop bit
X parameter
S parameter
Remarks
CP2 = COMPONENT2 IN
VID = VIDEO IN
HD2 = HDMI2 IN
RG1 = COMPUTER IN
OCL = I button
OCR = H button
1 = ON
1 = 60min. 2 = 90min.
6 = 210min. 7 = 240min.
(page 24)
5 = SINGLE LINE SCAN (Y)
6 = SINGLE LINE SCAN (R)
7 = SINGLE LINE SCAN (G)
8 = SINGLE LINE SCAN (B)
CN2 = CINEMA2 CN3 = CINEMA3
8 bits
1 bit
None
None
3 = 120min. 4 = 150min.
CL2 = COLOR2