Projector Body - Panasonic PT-AE3000U Operating Instructions Manual

About Your Projector

Projector body

Top and front view
Air exhaust port
Heated air comes out of
this opening.
Projection lens
Lens cover
Protects the projection lens
from dust or dirt.
Navigate through the menus with F G H I,
and activate the menu item with the ENTER
button. (page 29)
Power
While the MAIN POWER is on, switch between
standby mode and projection mode. (page 21)
MENU
Display the main menu.
Return to the previous menu. (page 29)
NOTE:
• Do not cover the ventilation openings or place anything within 50 cm (20") of them as this may cause damage or injury.
• While the projector is not in use, keep the lens cover attached to protect the lens.
E
12 - NGLISH
Lens shift dial • Vertical Lens shift dial • Horizontal
(page 16) (page 16)
Remote control signal
receptor
(page 23)
(Push to open/close the cover.)
RETURN
Return to the previous menu.
(page 29)
Air exhaust port
Heated air comes
out of this opening.
INPUT SELECT
Switch to cycle through the
input method. (page 22)
FOCUS and ZOOM
Adjust the focus and size of the
image. (page 22)
Power/LAMP/TEMP
indicators
(page 20/page 45)
Air filter
(page 46)
MAIN POWER
Switch the projector on/off.
(page 21)