Table of Contents
Advertisement
Chapter 13
13. 6. Specify Wireless Settings
13. 6. 1. Change Basic Wireless Settings
The router's wireless network name (SSID) and password, and security option are
preset in the factory. The preset SSID and password can be found on the product label.
You can customize the wireless settings according to your needs.
Visit http://tplinkwifi.net, and log in with the password you set for the controller.
To enable or disable the wireless function:
1. Go to
Basic
> Wireless.
2. The wireless radio is enabled by default. If you want to disable the wireless function
of the controller, just clear the
will be invalid.
To change the wireless network name (SSID) and wireless password:
1. Go to
Basic
> Wireless.
2. Enter a new SSID (32 characters at most) in the
new password in the
case-sensitive.
Note:
If you use a wireless device to change the wireless settings, you will be disconnected after the new settings are effective.
Please write down the new SSID and password for future use.
To hide SSID:
1. Go to
Basic
> Wireless.
2. Select
Hide
SSID, and your SSID will not be broadcast. Your SSID won't display on
your wireless devices when you scan for local wireless networks and you need to
manually join the network.
To enable or disable band steering:
Band Steering allows each of the device's wireless bands to use the same wireless
settings. The device can balance network demand and assign devices to the optimum
band.
1. Go to
Advanced
2. Turn on or off the Band Steering.
To change the mode or channel:
1. Go to
Advanced
want to change.
Enable
Password
field and click Save. The SSID and password are
>
Wireless
>
Wireless
>
Wireless
>
Wireless
Customize Your Network Settings
check box. In this case, all the wireless settings
Network Name (SSID)
Settings.
Settings, and select
field and a
2.4GHz
or
5GHz
you
66
Hide quick links:
Advertisement
Table of Contents
