RCA RPJ138 Product Manual page 22

The Lamp (Bulb) switches
off after a period of time
The Image is wider at
the top/bottom of the
screen
Spots on the screen
The image brightness
has faded
®
Roku Streaming Stick
will not power on
You cannot see the video
®
from your Roku
®
Streaming Stick on
your projector
For service assistance and product information, please call: 1-800-968-9853.
Pour obtenir assistance et information appelez: 1-800-968-9853.
Curtis International Ltd.
7045 BECKETT DRIVE, UNIT 15,
MISSISSAUGA, ON, L5S 2A3 www.curtisint.com
Is the warning light indicator red? If so, the
projector is overheating which turns the light
off automatically.
1.Leave the projector to cool for a few moments.
2.Once cooled, check nothing is blocking the
ventilation vents.
3.Check the air filter is clean and clean if
necessary.
4.Turn on the projector.
If the issue persists please contact your support
provider for further assistance.
This is called keystone and is due to the projection
angle not being perpendicular to the screen. To
correct use the projectors inbuilt keystone function
to adjust the image.
Using a vacuum cleaner to clean the lens. If
cleaning doesn't resolve things, please contact
your support provider for further assistance.
This could possible be caused by the ambient
light in the room. If not ,the chances are that you
need to replace the lamp (bulb).
®
The Roku Streaming Stick needs to be properly
®
connected to power in order to function. For optimal
performance, use the included USB cable to connect to
the USB 2 port on the projector.
First, make sure the projector is turned on and set to the
®
HDMI 3 input. Then press a button on the Roku remote
control to ensure that the Roku device is not in standby
or screensaver mode. Listed below are the most common
reasons you may not see video on your projector:
1. You have the wrong input (source) selected on your
projector. Look to see which input you have the Roku
Streaming Stick connected to. Press this button, it may
display a menu with a choice of inputs, Use the arrow
buttons on the projector remote to select the correct input
and then press OK.
2. The Roku Streaming Stick is not connected properly. ®
Ensure it is firmly connected to the HDMI 3 connector on
your projector.
3. If all else fails, disconnect and reconnect all cables
including the power cable. For more help
visit: go.roku.com/usingroku.
20
®
®
®
®