CREE LIGHTING CONNECTED MAX Quick Start Manual page 5

Attach your Tape Lights
1
Clean the surface with a
wet, damp cloth. Surface
must be dry and free of
dirt or oils.
3
Place the Tape
Light Strip where
you want, and
gently press down
to adhere.
5
Do NOT bend Tape
Light Strip at LED or
connection when going
around corners.
Do NOT bend at more
than a 90° angle.
2
Peal off the backing
strip from the
adhesive.
4
Connect the Tape
Light Strip into the
Controller and Wall
Plug. Use the supplied
Adhesive Pad to
secure the conroller.
LED
<90°
4