JVC DLA-VS2400ZG Instructions Manual page 50

Video image looks unnatural
Colors are unnatural
Check
Is the color space of the input signal
correctly set?
Is the image correctly adjusted?
Is the video source equipment properly
connected?
* The video image may appear slightly reddish immediately after starting up. This is not a malfunction.
Video image is fuzzy
Check
Is the focus correctly adjusted?
Is the unit placed too near or too far away
from the screen?
Projected image is dark
Check
Is the lamp near exhaustion?
Is the aperture closed?
Is "Lamp Power" set to "Low"?
Video images are missing
Check
Has screen mask been configured?
Is the display position misaligned?
50
The color may turn out unnatural when the input signal is
different from that in the projector setting.
Set the "Color Space" for "Input Signal" correctly.
Adjust "Color" and "Tint" accordingly.
Check to ensure that the video source equipment is
properly connected.
Adjust the focus.
Set the unit at a correct distance from the screen.
Check the lamp time in the "Information" menu. Prepare a
new lamp unit or replace as soon as possible when the
lamp is near exhaustion.
Adjust the Aperture.
Set "Lamp Power" to "High"
Set "Mask" to "Off".
Alter the "Picture Position" value so that the entire image
appears on the screen.
Action
Action
Action
Action
Refer to
p. 29
p. 28, p. 28
p. 19
Refer to
p. 31
p. 57
Refer to
p. 38
p. 39
p. 25
p. 25
Refer to
p. 30
p. 30