JVC DLA-VS2400ZG Instructions Manual page 59

Types of Possible Input Signals
Video (HDMI1, HDMI2)
Digital Video Signal
Video (Dual)
Digital Video Signal
In the DUal mode, both HDMI1 and HDMI2 need to be synchronized at 1080p/60 Hz or at 1080p/50 Hz.
0
PC Signal (HDMI1, HDMI2)
No. Designation Resolution
1 VGA 60 640×480
2 VGA 59.94 640×480
Indicator Display on the Main Unit
Meaning of the lighting figures
The indicator lights up.
.
Operation mode display
Displays using the different colors and solid/blinking light of the "STANDBY/ON" indicator.
"STANDBY/ON" lights up (red)
In standby state
STANDBY/ON TANDBY ND LAMP
"STANDBY/ON" blinking (red)
In the Cool-down mode
STANDBY/ON TANDBY LAMP
.
Estimated timing for lamp replacement
Displays using the solid/blinking light of the "LAMP" indicator. The "STANDBY/ON" indicator, which shows the operating
mode of the unit, is displayed simultaneously as described above.
"LAMP" lights up (orange)
STANDBY/ON
.
480p/60 Hz, 576p/50 Hz, 720p/50 Hz, 720p/60 Hz, 1080p/50 Hz, 1080p/60 Hz
1080p/50 Hz, 1080p/60 Hz
fh [kHz] fv [Hz]
31.500 60.000
31.469 59.940
"STANDBY/ON" lights up (green)
During lamp startup
WARNING STANDBY/ON TANDBY ND
"STANDBY/ON" blinking (green)
When the video image is temporarily hidden (HIDE is on)
WARNING STANDBY/ON TANDBY
When lamp replacement is near
LAMP LAMP AM WARNING
(lamp time has exceeded 3900 hours)
Total No.
dot CLK
of Dots
[MHz]
[dot]
25.200 800
25.175 800
The indicator appears blinking.
LAMP WARNING
LAMP WARNING
Total No. No. of
Effective
of Lines Effective
[line] Dots [dot]
525 640 480
525 640 480
All lights off
During projection
STANDBY/ON LAMP WARNING
No. of
Lines
[line]
59