Recalling Values From Memory; Clearing Values From Memory - Walgreens WGNBPW-920 Manual

RECALLING VALUES FROM MEMORY

This monitor can be used by two individuals. Each user
can store up to 100 measurements.
1. Press the USER-SELECT button and choose
User 1 or User 2.
2. Press the M button to access the memory.
3. The monitor will first display
the calculated average applied
to the last 3 memories ("AVG. 3").
4. Every new press of the M
button will recall a previous
reading. The latest reading
will be recalled first.
Note:
If the wrist positioning guide is ON before the measurement and the
monitor is not in the ideal position, the
with the saved readings.
OR
icon will be displayed
PM
25

CLEARING VALUES FROM MEMORY

1. Press the USER-SELECT button to select
User 1 or User 2.
2. Press M button to enter memory recall mode.
3. Press and hold the DATE/TIME SET
buttons at the same time and the data for the
selected user will be erased automatically.
Note:
Once deleted, your readings cannot be restored.
OR
and
26