Adjusting The Ez Db Fence - Kreg DB110 Instructional Manual

R
Adjusting the EZ DB Fence Setting
The Fence can be adjusted to align the pocket hole to the center of
material of different thicknesses. When adjusting the Fence make sure
that the Fence remains perpendicular to the Guide Plate. A Reference Scale
has been provided to approximate the fence setting for 1/2", 3/4", and
1-1/2" thick material. These correspond to the "A", "B", and "C" lines on the
Reference Scale.
Step 1. Loosen the (2) Socket-head Cap Screws contained below the
surface of the Fence as shown in fig. 10A.
Step 2. Align the Fence perpendicular to the Guide Plate for the
setting that corresponds to the material thickness as
shown in fig. 10C.
Step 3. Tighten the (2) Socket-head Cap Screws to lock the Fence
into position as shown in fig 10A.
A = 1/2"
A
Reference Scale (shown in black to show detail)
B = 3/4" C = 1-1/2"
C
B
DB55 Pneumatic - Adjustments
Sockethead Cap Screws hold the EZ DB Fence
The FOREMAN ships from the factory with the Fence
in the 3/4" setting.
Move the Fence to the setting outlined for the
thickness of the material to be drilled.
Fig. 10A
in position.
Fig. 10B
Fig. 10C
14.