Features & Specifications - Vinotemp WINE-MATE VINO1500SS Installation, Operation & Care Manual

• Wine-Mate split cooling systems VINO1500SS and 1900SS are designed and
used to provide a cold temperature between 50~65
wine room at a normal environment.
• The wine room will maintain humidity of 50~70% RH even when the
environment becomes dry and humid. These temperatures and humilities are
optimized for long term storage of wine.
• The SS units consist of a condensing unit and an evaporator unit, and they
are connected by a liquid line and an insulated suction line.
• The condensing units can be located away from the evaporator units and
wine cellars as far as 50 ft, which will bring you quiet operation.
• VINO1500SS evaporator unit can be installed on the ceiling in a wine cellar
and VINO1900SS evaporator unit can be installed on the wall.
The dimensions (in inches) and capacities are specified as follows:
EVAP COND
MODEL
UNIT UNIT
WM- WM-
VINO-
15SFC 150SCU
1500SS
WM-
VINO- WM-
150SCU
1900SS 19SFC
NOTE:
CAPACITY IS DETERMINED UNDER THE CELLAR TEMPERATURE, THE
CELLAR AMBIENT TEMPERATURE AND THE CONDENSING UNIT AMBIENT
TEMPERATURE OF 55
EXTERIOR INSULATIONS. ANY LOWER CELLAR AND HIGHER AMBIENT
TEMPERATURES AND LOWER INSULATIONS WILL CAUSE REDUCING
CAPACITY AND THE CELLAR TEMPERATURE MAY NOT BE MAINTAINED
°
AT 55 F.
CAUTION:
LOW AMBIENT TEMPERATURE KIT IS REQUIRED IF THE INSTALLATION
AREA WILL BE BELOW 50
CAUTION:
LIQUID AND SUCTION LINES MAY DIFFER FROM WHAT ARE SHOWN
HERE, PLEASE CHECK ON THE UNITS FOR PROPER INSTALLATION.
Parts included:
Condensing Unit (discharge and suction valves installed) + Liquid Filter + Liquid
Indicator
Features and Specifications
BTU/H,CFM CAPACITY
(55°F/90°F) (55°F/75°F)
1500/180 150 cu ft
1500/180 150 cu ft
° °
F, 75 F AND 90
°
F.
°
F for a properly insulated
REFRIGERANT
R134a
R134a
°
F, WITH R11 INTERIOR AND R19
- 3 -
ELECTRICAL WEIGHT(lb)
EVAP UNIT/ EVAP NIT/
COND UNIT COND UNIT
115V-60HZ-
0.4A/115V- 15/30
60HZ-3.1A
115V-60HZ-
2.2A/115V- 20/30
60HZ-5.1A