Styling Hair; Cleaning The Housing, Air Inlet And Concentrator Nozzle; Storage; Disposal - Silvercrest SRH 1600 A1 Operation And Safety Notes

˜ Styling hair
Using the concentrator nozzle
Put the concentrator nozzle
outlet .
[ 2 ]
Rotate the concentrator nozzle
position .
Switch on the product . Use the concentrator
nozzle to direct the air flow onto a specific
3 ] [
section of the hair .
NOTE:
We recommend to use gentle air flow and low
heat level (O / I / II switch
when styling hair .
Remove the concentrator nozzle
outlet : Pull the concentrator nozzle off with a
2 ] [
downward motion (Fig . F) .
m
CAUTION! Do not remove the concentrator
nozzle when it is still hot .
3 ] [
˜ Cleaning and care
m
DANGER! Risk of electric shock! Always
switch off the product and disconnect the power
plug from the electrical outlet before cleaning
[ 6 ]
the product .
m
WARNING! Do not immerse the product's
electrical components in water or other liquids .
Never hold the product under running water .
m
CAUTION! Do not use corrosive or abrasive
cleaning agents or material to clean the product .
˜ Cleaning the housing, air inlet
and concentrator nozzle
Remove the concentrator nozzle
outlet .
[ 2 ]
Wipe the housing, air inlet
concentrator nozzle
on the air
3 ] [
to change the
3 ] [
on position I)
5 ] [
from the air
[ 3 ]
from the air
3 ] [
and the
[ 1 ]
with a dry cloth .
[ 3 ]
˜ Storage
Store the product at a dry location out of the
reach of children .
(Fig . F)
Remove the concentrator nozzle
outlet : Pull the concentrator nozzle off with a
[ 2 ]
downward motion .
(Fig E)
Fold the handle
4 ] [
locks in at position a .
Store the product in the original packaging when
it is not in use .
Alternatively, the product can also be hung on its
hanging loop .
[ 7 ]
˜ Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local recycling
facilities .
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and
fibreboard / 80–98: composite
materials .
The product and packaging materials are
recyclable, dispose of it separately for
better waste treatment .
The Triman logo is valid in France only .
Contact your local refuse disposal
authority for more details of how to
dispose of your worn-out product .
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste . Information
on collection points and their opening
hours can be obtained from your local
authority .
from the air
3 ] [
until the foldable joint
9 ] [
GB 11