Edge-Core AS7926-40XKFB Quick Start Manual

Quick Start Guide
100G Aggregation Router
AS7926-40XKFB
1
1. AS7926-40XKFB
2. Rack mounting kit
3.
2 x Power cord
1
2
1. 40 x 100G QSFP28 ports
2.
13 x 400G QSFP-DD fabric ports
3.
Air filters
4.
Product tag
5.
2 x RJ-45 Stack-Sync ports
6.
Timing Ports: 2 x RJ-45 PPS/ToD, 1PPS/10MHz connector
1
1.
QSFP28 Port LEDs:
■
Blue — 100G
■
Yellow — 40G
■ Cyan — 2 x 50G
■
Magenta — 4 x 25G
■
Green — 4 x 10G
2.
QSFP-DD Port LEDs:
■
Blue — 400G
FRU Replacement
PSU Replacement PSU Replacement
1. 1.
Remove the power cord. Remove the power cord.
2. 2. Press the release latch and Press the release latch and
remove the PSU. remove the PSU.
3. 3.
Install replacement PSU with Install replacement PSU with
matching airflow direction. matching airflow direction.
*150000000075A_R01*
Package Contents
3
1
3
5
4
2
Fan Tray Replacement Fan Tray Replacement
1. 1.
Press the release latch in the Press the release latch in the
fan tray handle. fan tray handle.
2. 2.
Pull out to remove the fan. Pull out to remove the fan.
3. 3.
Install replacement fan with Install replacement fan with
matching airflow direction. matching airflow direction.
2 3
4. Console cable—RJ-45 to D-Sub
5.
Documentation—Quick Start Guide (this document) and Safety
and Regulatory Information
Overview
8
7
7 9
6
7. Management I/O: 1000BASE-T RJ-45, 2 x 10G SFP+, RJ-45/
Micro USB console, USB storage, reset button, 7-segment display
8.
2 x AC PSUs
9.
Grounding screw
10.
5 x fan trays
Status LEDs
3.
System LEDs:
■
SYS/LOC — Green (OK)
■ DIAG — Green (OK), Red (fault detected)
■
PWR — Green (OK), Amber (fault)
■
FAN — Green (OK), Amber (fault)
4.
Management Port LEDs:
■
SFP+ OOB Port — Green (10G), Amber (1G)
■ RJ-45 OOB Port — Right (link), Left (activity)
Air Filter Replacement
1.
Unscrew the filter cover captive screws.
2. Remove the old filter and install a replacement filter.
3.
Replace the filter cover and tighten the captive screws.
– 1 –
www.edge-core.com
4
10
4
3
Air Filter Replacement
5
4
E082021-CS-R01
150000000075A