Table of Contents
Advertisement
3-16
MC3000 User Guide
3. Tap Open. The file is transferred from the mobile computer to the remote device.
Connect to Internet Using Access Point
This section explains how to access a Bluetooth-enabled LAN access point (AP) for a network connection. With this method of
communication the Internet Explorer can be used to connect to a server.
1. Ensure the mobile computer is discoverable and connectable. See
2. Discover and bond (pair) with the remote access point.See
3. In BTExplorer, select the Remote Devices folder.
4. Select the Trusted Devices folder.
5. Tap the remote device folder.
6. Tap and hold on the remote device and select Explore from the pop-up menu.
7. Tap and hold LAN Access using PPP service and select Connect from the pop-up menu.
8. The mobile computer connects with the Access Point.
9. Tap Start - Internet Explorer. The Internet Explorer window appears.
10. In the address field, enter an internet address and tap the Enter button. The web page loads.
Dial-Up Networking Services
To use a phone that has Bluetooth capabilities as a modem for the mobile computer, create a Bluetooth modem connection on the
mobile computer and send information to the phone using Bluetooth. The phone relays the information over the phone line and sends
back to the mobile computer any information that was requested over the connection. Once a modem connection is created to the
Bluetooth phone, it can be reused.
Prior to creating a connection, ensure the following:
• Bluetooth phone is turned on.
• Bluetooth phone is discoverable. (Some phones may also need to be pairable in order to accept a bonding request. For more
information, refer to the phone documentation.)
• Mobile computer's and phone's Bluetooth radios are turned on.
• Mobile computer and phone are within range of each other (30 feet/10 meters).
Complete the following steps to create a new Bluetooth connection. Before setting up dial-up networking, obtain dial-up information
and other necessary settings for the office network or ISP.
1. Ensure the mobile computer is discoverable and connectable. See
2. Discover and bond (pair) with the remote device.See
3. In BTExplorer, select the Remote Devices folder.
4. Select the Trusted Devices folder.
5. Tap the remote device folder.
Bluetooth Settings on page
Bonding with Discovered Device(s) on page
Bluetooth Settings on page
Bonding with Discovered Device(s) on page
3-22.
3-10.
3-22.
3-10.
Advertisement
Table of Contents
