Related Manuals for McIntosh MCC82
Summary of Contents for McIntosh MCC82
- Page 1 All manuals and user guides at all-guides.com OWNER’S MANUAL MCC82 Power Amplifier MCC82 McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549...
-
Page 2: Table Of Contents
16 Gauge (AWG) wire size or larger. If it is determined that your MCC82 is in need of repair, you can return it to your dealer or you can return it to McIntosh Laboratory. -
Page 3: Safety Instructions
All manuals and user guides at all-guides.com Safety Instructions IMPORTANT SAFETY 7. Do not use attachments not recommended in this INSTRUCTIONS! owner’s manual as they may cause hazards. PLEASE READ THEM BEFORE Installation: 8. Locate the equipment for proper ventilation. For ex- OPERATING THIS EQUIPMENT. -
Page 4: Introduction
McIntosh Sentry Monitor power output stage protection uct, ask the service technician to perform safety checks circuits are present on all channels to ensure the MCC82 to determine that the product is in proper operating will have a long and trouble free operating life. -
Page 5: Installation
All manuals and user guides at all-guides.com Installation Installation It is recommended that the MCC82 and any associated mo- It is not recommended that the amplifier not be mounted bile audio equipment be installed by a professional who is under the hood or in a location where it will be directly ex- skilled in all aspects of installation and operation. -
Page 6: Side Panels Connections
All manuals and user guides at all-guides.com MCC82 Side Panel Cooling and Connections MCC82 Side Panel Cooling and Connections Connect the MCC82 INPUTs for audio cables to the vehicle battery from a control center terminals audio outputs The ON receives... -
Page 7: How To Connect
1. Connect the power control cable from the Control Cen- Note: If the amplifier is mounted to an insulated mounting surface, connect a 10 AWG wire (minimum size) from ter Amp On to the MCC82 ON connector on the right the amplifier side of the amplifier. -
Page 8: Top Panel Controls, Displays And Switch
Switch POWER GUARD Indicator POWER On Main Fuse, refer to information on the top lights when any amplifier Indicator panel of your MCC82 to determine the channel Power Guard circuit correct fuse rating. activates Left Input LEVEL STEREO - BRIDGE... -
Page 9: How To Operate
Figure 2 volts to 0.3 volts. Refer to figure 2. Power The MCC82 will turn on or off when the Control Center turns on or off. Figure 3 Note: There must be an Amp ON connection between the MCC82 and the McIntosh Control Center in order for the amplifier power turn on and off to function. -
Page 10: Specifications
All manuals and user guides at all-guides.com Specifications Specifications Dimensions Power Output Per Channel 10 inches (25.4 cm) wide, 7.25 inches (18.4 cm) high, 2.12 40 watts into a 4 ohm load is the minimum sine wave con- inches (5.38cm) depth tinuous average power output per channel. -
Page 11: Packing Instruction
If a ship- ping carton or any of the interior part(s) are needed, please call or write Customer Service Department of McIntosh Laboratory. Please see the Part List for the correct part... - Page 12 All manuals and user guides at all-guides.com McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, NY 13903 McIntosh Part No. 040560...