Table of Contents
Advertisement
13 . p
c
M
roTo
ol
oDbus
Data communication takes place along a series line of a standard RS-485 with protocol Modbus
RTU. A list of relevant variables is provided in a separate annex.
To set up the level meter and collect measured data, you can use the software application "Basic
SCADA level", which is freely available at the Website www.Levelpro.cz. Connecting the level
meter to a peripheral device can be performed using a converter URC-485, see image 23.
UltraPro 1000_-_ _-_-M
Obr. 23: Typical hardware configuration with Modbus
14 . o
rDer coDe
UPS-1000
–
–
–
15 . a
ccessories
Standard – incl. in the price of the level sensor
•
1 pc of Seal (for UPS-1000_–02–I, 06–I)
•
free-to-download programme Basic Scada
Level (for the Modbus version)
23
®
convertor
URC-485
RS485 / USB
–
–
Set-up elements: D – basic version with display
Electrical connection: B – short cable outlet
H – outlet for protective conductor
Output type: I – current output
M – RS-485 (Modbus RTU)
Process connection: G – thread
F – flange
02 – 0,15 ... 2 m
Maximum reach:
06 – 0,25 ... 6 m
10 – 0,4 ... 10 m
20 – 0,5 ... 20 m
Performance: N – Normal – usable in non-explosive areas only
Xi – Ex. proof – suitable for explosive areas
Optional – for extra charge
•
Fixing nuts 1" and 1 ½" and 2 ¼
•
Horn adapter ST–G1,
STG1,5 and ST–G2,25
•
for version Modbus convertor URC-485
Power supply unit
®
L – without display, metal lid
Ultrapro 1000
© Levelpro
Advertisement
Table of Contents
