9 . s
-
eT
up eleMenTs
Cable gland
Control buttons
OLED display
Button
•
Set-up mode access
•
Confirmation of selected item in the menu
•
Move the cursor in the line
•
Saving of set-up data
Button
•
Move in the menu
•
Change of values
Button
•
Cancelling of carried out changes
•
Shift one level up
10 . s
TaTus signalizaTion
display
function
Flashing – the level meter is not able to receive echo for a long time. Incorrect
"NO ECHO"
installation of the level meter
Flashing – the measured level is in the "dead zone" of the level meter or the
"DEAD ZONE"
ultrasonic converter is dirty.
It will appear in the item "MENU" – the level meter is protected using a pass-
"NO PASSWORD"
Ultrasonic Level Meter ULM-70
word against unauthorised setting. Enter the correct password (see p. 19).
Symbol "T"
Flashing – "TEACHING" mode activation.
1)
1745
Flashing– correct echo receiving (of the reflected signal) from
Symbol "E"
1)
the measured surface level.
Flashing – level meter is locked against unauthorized settings by
mm
T
E
Symbol
1)
a password. You must enter the correct password to unlock it (see page 19).
symbol appears in the lower left corner of the display
1)
ESC
© Levelpro, s.r.o.
UltraPro 1000
www.dinel.cz
Upper lid nut
Label
Ultrasonic transmitter
Fig. 20: Full view of the level meter
Display
of measured values
Set-up elements
Teaching
mode activation
OK
Ultrasonic Level Meter ULM-70
1745
mm
T
Ultrasonic Level Meter ULM-70
ESC
OK
www.dinel.cz
1745
ESC
OK
mm
T
E
Echo receiving
Level meter locked
ESC
www.dinel.cz
ESC
Units
OK
OK
14