Chapter 3
Configuring the Device Driver
22
To configure the DT3120 Device Driver, perform the following steps:
1.
Open the Control Panel.
2.
Double-click the DT Imaging Control icon.
3.
Select the DT3120 board to configure.
4.
Select the Video Format as either 50 Hz or 60 Hz.
5.
When you are finished, click Done.
If you made any changes, the Save Changes dialog box appears.
6.
If you want to save your changes, click Yes.
When you are finished with this procedure, continue by connecting
signals to the board. Refer to
Chapter 4 starting on page
23.