Table of Contents
Advertisement
Vega SI-11 / User Manual
Location of the
launch button on
the board
7. By the laptop you can make sure that the device successfully sends the data.
8. Before assembling the device, it is necessary to reset the pulses accumulated during
testing and connection by switching the device to the "Storage" mode by pressing
the button for 5 seconds.
9. Start the device by pressing launch button.
10. Assembling the device.
11. DIN-rail mounting or another available way to mount the device on the object.
Revision 26 of 25 August 2021
13
Advertisement
Table of Contents
