Led Indications - Vega SI-11 User Manual

Vega SI-11 / User Manual

LED INDICATIONS

There is one red LED on the board. The indication is only used when the device is
activating in the LoRaWAN
LED location on the
board
LED SIGNAL
In case of connection attempt fail, the device will continue to accumulate
data and will attempt to connect to the network every 6 hours
Revision 26 of 25 August 2021
network and when the operating modes are changing.
®
Short flashings
One long flashing
during 5 sec
Three flashings each by
1 sec
MEANING
Linking to the network in progress
The device has been successfully
connected to the network and is in
active mode
Linking to the network has been failed
or the device switched to the
"Storage" mode
11