Danfoss FC322 Series Instruction Manual page 71

Automation VT Drive FC322
Instruction Manual
MCT 10 has been designed as an easy to use interactive tool for setting parameters in our frequency converters. The software can be downloaded from
http://www..com/BusinessAreas/DrivesSolutions/Softwaredownload/DDPC+Software+Program.htm
the internet site
The MCT 10 set-up software will be useful for:
• Planning a communication network off-line. MCT 10 contains a complete frequency converter database
• Commissioning frequency converters on line
• Saving settings for all frequency converters
• Replacing a frequency converter in a network
• Simple and accurate documentation of frequency converter settings after commissioning.
• Expanding an existing network
• Future developed frequency converters will be supported
MCT 10 set-up software supports Profibus DP-V1 via a Master class 2 connection. It makes it possible to on line read/write parameters in a frequency
converter via the Profibus network. This will eliminate the need for an extra communication network.
7 How to Operate the Frequency Converter
MG.20.U1.22
.
7
71