Printer Test And Setup; Printer Test - NCI MiniPrinter 122 Series User Manual

Printer Test and Setup

The printer can be tested and setup using the steps
described in this section. Testing and setup are done
using the rocker switch on the printer.
P P P P P rinter T rinter T rinter T est est
rinter Test rinter T est est With the printer unplugged at the outlet or at the back of
the printer, press and hold the right side of switch as you
plug the unit in. The printer will print out a list of the
configuration as it currently exists then do a continuous
print test. To stop the print test, press either side of the
rocker switch. Below is a sample of what is printed when
you do the print test.
T & D will be T & D T & D T & D T & D
printed in the list to
the right if the
Time and Date
option is installed.
8 8 8 8 8