NCI MiniPrinter 122 Series User Manual page 35

After typing RUN, your custom character will be stored in
the printer's memory. It will retain this information until
the printer is switched off or until you write over the data
by defining a different character.
To print your newly designed character, simply send
CHR$(126) which corresponds to hexidecimal value 7E.
Set Time and Date Set Time and Date This control code is used when setting the printer's time
Set Time and Date Set Time and Date Set Time and Date
Control Code 20 Control Code 20 Control Code 20 Control Code 20 Control Code 20 and date clock. Following is the text string to send when
setting the clock:
This control code is used to read the printer's time and
Read Time and Date Read Time and Date Read Time and Date Read Time and Date Read Time and Date
Control Code 22 Control Code 22 date clock. Following is the ASCII string received:
Control Code 22 Control Code 22 Control Code 22
Cancel Reverse Field Cancel Reverse Field Cancel Reverse Field Cancel Reverse Field Cancel Reverse Field Sending this control code will turn off the reverse field
Control Code 24 Control Code 24 Control Code 24 mode that is selected using control code 25.
Control Code 24 Control Code 24
Reverse Field Control Reverse Field Control Send this control code to turn on the reverse field
Reverse Field Control Reverse Field Control Reverse Field Control
Code 25 Code 25 Code 25 Code 25 Code 25 printing mode. This will print white letters on a dark
background. Do not print more that three reverse field
print lines. Also, do not print more than a few empty
spaces in a reverse field. The printer may become
overloaded and stop printing.
30 30 30 30 30