NCI MiniPrinter 122 Series User Manual page 16

P P P P P arity arity arity arity arity Parity can be selected only if 7 data bits are set. Choose
Odd or Even. If you choose 8 data bits, parity defaults to
None.
Stop Bits Stop Bits Stop Bits ST ST ST ST STOP BITS OP BITS OP BITS is the next parameter. Choose 1 or 2 stop bits. OP BITS
Stop Bits Stop Bits OP BITS
1 stop bit is used for 10 bit words, 2 stop bits are used for
11 bit words.
H H H H H ANDSHAKE ANDSHAKE ANDSHAKE ANDSHAKE is the next parameter. Choose from the ANDSHAKE
Handshake e e e e Handshak Handshak Handshak Handshak
following settings:
Handshake is
used for serial
interface only.
Columns Columns
Columns Columns Columns COL COL
COL COLUMNS COL
characters per line (columns) for this parameter. The
choices you have are 24, 32, or 40. Below are samples of
each:
INVERT is the next parameter. Choose OK if you want INVERT INVERT INVERT INVERT
Invert Invert
Invert Invert Invert
inverted text (upside down) or NEXT if you want non-
inverted text (right side up) in your printouts. Below is an
example of inverted text.
Font Font Font Font Font
FONT is the next parameter. Choose from a 5 x 5 dot FONT FONT FONT FONT
matrix print pattern or a 5 x 8 dot matrix pattern. The
5 x 5 dot pattern produces only upper case (capital)
letters.
Magnification Magnification
Magnification Magnification Magnification
The last parameter is MAGNIFICA
size of printed type from your printer. Your choices (with
examples) are
NONE
DOUBLE WIDE
11 11 11 11 11
BUSY-LINE
BUSY-BUFFER
XON/XOFF-LINE
XON/XOFF-BUFFER
NONE
UMNS UMNS
UMNS is the next parameter. Select the number of UMNS
MAGNIFICATION MAGNIFICA MAGNIFICA
MAGNIFICA
TION TION. This refers to the TION
TION