Printer Test and Setup
Printer Test
T & D will be printed in
the list to the right if
the Time and Date
option is installed.
The printer can be tested and setup using the steps
described in this section. Testing and setup are done
using the rocker switch on the printer.
With the printer unplugged at the outlet or at the back
of the printer, press and hold the right side of switch
as you plug the unit in. The printer will print out a list
of the configuration as it currently exists then do a
continuous print test. To stop the print test, press
either side of the rocker switch. Below is a sample of
what is printed when you do the print test.
Model 122X MiniPrinter User's Manual
13