Table of Contents
Advertisement
To insert the battery:
1.
Align the tabs on the rear edge of the battery with the notches on the rear edge of the battery bay.
2.
Pivot the front edge of the battery down into the battery bay until it is seated. (The battery release
latch will automatically lock into place.)
Optical drive
NOTE:
The optical drive spare part kit includes a bezel and bracket.
Description
DVD±RW and CD-RW Super Multi Double-Layer FX Combo Drive with LightScribe
DVD±RW and CD-RW FX Combo Drive
DVD±RW and CD-RW Super Multi Double-Layer FX Combo Drive with LightScribe
Blu-ray ROM with LightScribe DVD ±R/RW Super Multi Double-Layer Drive for use only with
computer models equipped with an Intel processor
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe
Optical drive bay space saver (not illustrated)
Before removing the optical drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Remove the optical drive:
1.
Slide the service cover release latch to release the service cover.
60
Chapter 4 Removal and replacement procedures
Battery on page
59).
Spare part number
641808-001
659966-001
659967-001
641824-001
641809-001
659965-001
Advertisement
Table of Contents
