Table Of Contents - signia Pure Charge&Go X User Manual
Hide thumbs
Also See for Pure Charge&Go X:
- Manual for hearing care professionals (15 pages) ,
- Manual (16 pages)
Need help?
Do you have a question about the Pure Charge&Go X and is the answer not in the manual?
Questions and answers
Left hearing aid won't turn on
The Signia Pure Charge&Go X left hearing aid may not turn on due to the following reasons:
1. It is turned off – Turn the hearing instrument on.
2. The battery is depleted – Charge the hearing instrument.
3. There is an issue with charging – Observe the status LEDs on the charger.
If the problem persists, consult a Hearing Care Professional.
This answer is automatically generated
how do I pair the Pure Charge&go X to answer the I phone?
The document mentions that the Signia Pure Charge&Go X hearing aids are Made for iPhone, allowing audio streaming and phone calls directly from an iPhone. However, it does not provide specific pairing steps. For pairing instructions, contact your Hearing Care Professional.
This answer is automatically generated
How to connect aids to computer. it was suggested by audiologist to place in charger before connecting to computer. tried many times and it does not work.
Why does left hearing aid play a musical scale..starts high and goes to low note after wearing about 10 hrs?
The Signia Pure Charge&Go X left hearing aid plays a musical scale that starts high and goes to a low note after about 10 hours of use because it signals that the power cell is running low. The hearing aid provides an alert signal when the battery is low, and this signal repeats every 20 minutes. If the power cell is not recharged, the hearing aid will stop working after approximately 1.5 hours.
This answer is automatically generated
Cannot get both hearing aids to connect
To connect both Signia Pure Charge&Go X hearing aids:
1. Put the hearing aids into pairing mode by placing them in the charger and then taking them out.
2. On your iPhone, go to the Bluetooth settings.
3. Wait for both hearing aids to appear in the list of available devices.
4. Tap on each hearing aid when it appears and confirm the pairing by selecting "Pair."
5. Once paired, the hearing aids will automatically stream audio from phone calls, music, or videos.
6. You can adjust volume settings together or independently through the app or device settings.
This answer is automatically generated