Spare Parts - Russell Hobbs RHMO10 Instructions & Warranty

Problem
Too noisy
Door not shutting/
locking
Turntable not
rotating

SPARE PARTS

Potential reason
1. Glass turntable fitted
incorrectly
2. Dishes/plate are too
large for the microwave
1. Glass turntable fitted
incorrectly
2. Latches have
become deformed
1. Turntable coupling
not fitted or tape not
removed
2. Turntable roller
ring not fitted or fitted
incorrectly
3. Glass turntable fitted
incorrectly
4. Turntable has
developed a fault
Turntable coupling
Glass turntable
Potential solution
Check that the glass turntable has been
placed correctly on the turntable and is not
hitting the walls/doors of the microwave
during operation.
Check that the dishes/plates are the correct
size for the microwave and that they are not
hitting the walls/door of microwave during
Check that the glass turntable has been
placed correctly on the turntable and is not
stopping the door from shutting correctly.
If the microwave is within its warranty
period, please contact customer services
for further advice or take the microwave
back to the retailer it was purchased from
for a refund or replacement.
Check that the turntable coupling is fitted
correctly and the transportation tape has
been removed.
Check that the coupling has be placed
under the turntable and that it is position
Check that the glass turntable has been
placed correctly on the turntable.
If the microwave is within its warranty
period, please contact customer services
for further advice or take the microwave
back to the retailer it was purchased from
for a refund or replacement.
Turntable ring
22
operation.
correctly.