Table of Contents
Advertisement
Press the Start/+30sec/Confirm button to commence.
4.
Make sure you monitor cooking progress as times can vary. Allow the food to stand in the
microwave for 1-2 minutes after the cooking cycle is complete.
MULTI SEQUENCE COOKING FUNCTION
For some recipes, results may be better if you wish to cook on different power levels for
different times, for one dish.
Note: This can be used to set a maximum of two different stages. The auto menu cannot
be set as one of the multi stage cooking functions.
For example, if you wanted to defrost 500g of food, then cook it at 80% microwave power for
7 minutes the steps are as follows:
Press the Weight/Time Defrost button once the screen will display
1.
2.
Turn the Timer/Weight/Auto Menu dial to adjust the defrost weight to 500g.
Press the Power button once.
3.
4.
Turn the Timer/Weight/Auto Menu dial to choose 80% microwave power until the
display shows ' P80 '.
Press the Start/+30Sec/Confirm button to confirm.
5.
6.
Turn the Timer/Weight/Auto Menu dial to adjust the cooking time to 7 minutes.
Press the Start/+30Sec/Confirm button to start the cooking process.
7.
PRE SET COOKING FUNCTION
You can set your microwave to start cooking at a pre set time, without the need to be present
to input the programmes. Make sure your food is in the microwave and prepared when you
programme the pre-set function.
You will need to set the clock and the cooking menu and time.
It is possible to input a maximum of 2 cooking stages. Do not use the defrost function in the
pre set function. The auto menu can be set for a single stage only.
PRE SET COOKING FUNCTION EXAMPLE
If the current time is, say, 12:30 and you want the microwave to cook on 80% power for 7
minutes at 14:20
With the colon flashing on the display screen, press the Power button
1.
2.
Turn the Timer/Weight/Auto Menu dial to choose 80% microwave power P80 is
3.
Press Start/+30Sec/Confirm button to confirm.
Turn the Timer/Weight/Auto Menu dial to adjust the cooking time to 7 minutes.
4.
5.
After the above steps, DO NOT press Start/+30Sec/Confirm button, but do as follows:
6.
Press the Clock/Pre Set button, the current time displays and the hour figures flash.
Turn Timer/Weight/Auto Menu dial to adjust the hours to display 14:. Press Clock/Pre
7.
Set button and the minute figures will flash. Turn the Timer/Weight/Auto Menu dial to
adjust the minutes to display 20. This sets the start time.
8.
Press Start/+30Sec/Confirm button to finish setting.
The ":" will illuminate, the buzzer will ring twice when the set start time arrives, and
then cooking will commence automatically.
If you wish to cancel the pre set cooking, press the Stop/Clear button.
16
Advertisement
Table of Contents
