TRENDnet TPE-P521ES User Manual page 8

5-port gigabit poe+ powered edgesmart switch with poe pass through

Table of Contents

TRENDnet User's Guide

7. Configure the switch IP address settings to be within your network subnet, then click

Apply.

Note: You may need to modify the static IP address settings of your computer's network

adapter to IP address settings within your subnet in order to regain access to the switch.

8. When confirmation message appears click OK.

NOTE: The configured settings are only applied to the switch's temporary memory and

will be lost upon the next power-cycle. Please follow these next steps to save the

configurations to the switch's NV-RAM to ensure the settings will remain throughout

power-cycles and reboots:

1. From the menu on the left: click on Save, then click the blue button Save

Settings to Flash.

2. Click Continue to return to the Web Configuration of your switch.

TPE-P521ES

Table of Contents